Product - VS Turbine Bypass Stop Valve
​​​​​​​​​The IMI CCI VS Turbine Bypass Stop Valve is used in the harsh environment of modern fossil-fuelled power plants when a separate stop valve is used upstream of the HP and/or LP turbine bypass valves, or whenever a tight shut off valve is required. The VS valve is also used when a separate stop valve is required in the spray water line.

Another application for the VS valve is as an isolation valve in a process steam line.

The Kv/Cv-value of the valve depends on the pressure ratio between inlet and outlet and must – for each valve – be calculated by the computer program, where all throttling points in the valve are taken into consideration. A certified dimensional drawing will be supplied by IMI CCI.

Key features

​The VS valve design is an angle style. The valve body, fully machined of forged CrMo low alloy or carbon steel, is designed to minimise material stresses as well as to fit the requirements of the piping system with regard to material, pressure class and piping connections..
  • An even material distribution is essential to minimise the material stresses. By using the homogenous forged material, an accurate and controlled wall thickness is achieved
  • For severe operating conditions with large temperature variations, we recommend continuous preheating of the valve inlet side
  • The hard-faced seat is integrated with the valve body, thus assuring tight shut-off. This design, which elimininates the use of a gasket, provides a class V (ANSI / FCI 70-2) tightness between valve body and seat
  • The plug and stem assembly is made of a corrosion-resistant alloy, which is surfacetreated
    to provide a sufficient hardness. The plug is guided by the stem or by the bonnet

  • ​A pressure seal bonnet design is used, which is tight, safe and easy to mount and remove
  • The VS valve is designed to be operated by an actuator, and depending on the actuating force and project prefer​ence, any type of actuator can be selected:
    • Pneumatic actuator
    • Electrohydraulic actuator
    • Electromechanical actuator
  • Available in balanced tight design which reduces the required opening forces​


  • Customisable
  • Designed to minimise material stresses
  • Easy mounting and removal
  • Reliable connection – safety
  • Tight

Product specification

Valve configurations
The IMI CCI stop valves are available in a number of designs, all derived from the VS configuration:
VS-T -  Unbalanced, tight design with leakage tightness according to ANSI B16.104 Class V
VS-BT - Balanced, tight design. Leakage tightness according to ANSI B16.104 Class V

Valve designation guide
Valve type VS
Plug design T, BT​


Latest News

IMI Truflo Marine unveils plans for new headquarters
05 November 2020
Half a century for Keith at IMI Truflo Marine
06 October 2020
IMI Critical Engineering digital FAT delivers customer projects on time
07 September 2020
Another big aftermarket win in LATAM for IMI Critical Engineering
18 August 2020
Important Update – COVID-19
18 March 2020
Valve Doctor programme celebrates 20th anniversary
16 September 2019
Unconventional support for the unconventional oil and gas industry
01 July 2019
17 June 2019
IMI CCI showcases choke valve at DUG Rockies conference
04 June 2019
Jackie Hu appointed Divisional Managing Director of IMI Critical Engineering
07 March 2019
Roy Twite to succeed Mark Selway as Chief Executive of IMI plc
05 March 2019
IMI Critical holds Safety Summit
21 September 2018
New HSE handbook to help keep field service engineers safe
10 August 2018
Safety first at IMI Critical
31 July 2018
IMI InterAtiva’s Series RK Valves certified ‘fire-safe’
24 July 2018
IMI CCI participates at regional VPP Safety Summit
08 June 2018
Largest Romanian customer recommends IMI Remosa
10 May 2018
Lean success in IMI Critical back office functions
04 May 2018
Isolation valves adapted for Fluidised Catalytic Cracking applications
30 April 2018
IMI Critical Korea closes in on world-class LEAN performance
27 April 2018
IMI board tours IMI Critical businesses
25 April 2018
New positioner software tools from IMI STI
08 February 2018
Launch of Zero Backlash Scotch Yoke Mechanism
16 January 2018
IMI Critical Korea certified to sell actuators in Europe
20 September 2017
IMI Critical named ‘supplier of the year’ by Korea’s Doosan
19 September 2017
100th Valve Doctor graduates from IMI Critical
13 September 2017
Top HSE certification for IMI Critical’s California site
12 September 2017
Launch of High Endurance Actuator
21 April 2017
Launch of AB6350 valve
06 April 2017
Launch of 100DPC Multi-trim
17 March 2017
Launch of 840GS control valve
22 December 2016
IMI Critical to exhibit new technology at ADIPEC 2016
25 October 2016
New graduates join IMI Critical in four countries
22 September 2016
IMI Critical to take stand at ONS 2016 in Norway
16 August 2016
IMI Critical opens new China plant in Qingpu
27 July 2016
IMI CCI Korea celebrates 2,000 days of no “Lost Time Accident”
25 July 2016
Visit to IMI Z&J Germany by the Russian Economic Bureau from Bonn
11 July 2016
IMI Z&J Düren moves into modern offices
08 July 2016
IMI Critical Engineering forms strategic partnership with MRC Solberg & Andersen
05 April 2016
IMI Way Day 2016 date announced
01 March 2016
NEW IMI Eye – fourth edition
26 February 2016
IMI Critical co-locates China businesses
20 January 2016
IMI CCI Switzerland gains certification for new generation safety valves
18 December 2015
IMI Critical rise to Dragon challenge
30 November 2015
IMI STI achieves CRCC approval for new products
24 November 2015
IMI Truflo Marine Attend the Engineering Technology and Innovation Exhibition 2015
23 November 2015
IMI CCI Sweden secures new contracts on three continents
23 November 2015
IMI Critical Engineering appoints new petrochemicals head
05 November 2015
IMI CCI Czech Republic gains ‘Safe Enterprise’ certification
03 November 2015
IMI Critical announces 90mRMB investment in China
29 October 2015
IMI CCI SriCity wins regional safety award
27 October 2015
Key clients attend grand opening of new Aberdeen facility
23 October 2015
IMI companies ‘act as one’ to deliver for customer
02 October 2015
IMI CCI Sri City approved by NTPC
01 October 2015
IMI Critical Engineering showcases innovation at Valve World Expo Asia
28 September 2015
Nexen awards IMI Orton
25 September 2015
IMI Critical Engineering celebrates opening of new Jubail repair centre
23 September 2015
IMI Critical and IMI Precision join forces at Valve World Expo + Conference Asia 2015
21 September 2015
IMI Critical Engineering opening of new Jubail Repair Centre
18 September 2015
IMI CCI India manufactures first 1050MW turbine bypass valve
20 May 2015
Largest ever contract for IMI Critical Engineering
18 February 2015
New Houston facility opens
12 February 2015
IMI Critical completes acquisition of Bopp + Reuther
02 January 2015
IMI Critical takes family of brands to Valve World 2014
11 December 2014
IMI STI doubles size of Italian plant
20 October 2014



​​Global sales:​​​
Product - VS Turbine Bypass Stop Valve